Table of Contents
1. What is low skin fade?
A low skin fade haircut deals with the shortest haircut with the skin level. Among all other haircuts, low skin fade is different because of its position. It is generally done near the nape area and the sides.
There must be a division line from where the gradual decrement of hair will be done. And above the line, the hair will be longer than the fade.
2. What’s the Difference between low skin fade and mid skin fade?
The skin fade haircut has mainly three parts. Low skin fade and mid skin fade are two parts of it. Many especially those who are new to the styling world, have confusion around the use of these terms. There are mainly two differences. Those are as follows.
- The hair length of the mid-skin fade will be 0.5 to 2. On the other hand, the hair grade of low skin fade will be less than 0.5.
- Secondly, the mid-skin fade is being done on the place between the temples and the ears. The low skin fade is being done near the sides and the nape.
There are some other differences too however to get an apparent idea, these two are enough.
3. How can I fade my low skin?
If you are interested in a low skin fade haircut, here complete guidance is provided. A low skin fade haircut needs a trimmer fixation less than 0.5 grade.
So your first step will be choosing a haircut. The low skin fade will look good on your face if, you choose an adjusting haircut for the top part of your head. This must be according to your face shape.
Prepare yourself with instruments like a trimmer, razor, shaving cream, comb, scissors, and a mirror. Now make a division line around your head from where you need to start your skin fade.
If your hair is too long, you can shape them with the help of a scissor. Set your trimmer less than 0.5. Run it throughout below the division line. Up to this point, your low fade is ready. If you want to make a design anywhere below the division line, go ahead.
This is how a low skin fade is being done. In need, you can use a razor and shaving cream to wipe some special areas.
4. What looks good between low skin fade and high skin fade?
A skin fade haircut is being done to look stylish. Both low and high skin fade are the parts of the skin fade haircut. So if you ask this question what will look good, then there is no specific answer. Instead of that, we can provide information on when each of these skin fades will look good.
If you have chosen a haircut that requires long hair then you should go with a low skin fade. Men with fair skin tone will look good with this.
Again, if you have a dark skin tone, a high skin fade will look good. A high skin fade always looks good with a short haircut. So choose accordingly.
5. What to tell my barber for a low skin fade?
For a low-skin fade haircut, it is always best to go to a barber. As you know the grade, communicating with the barber will be easy now. You need to have a fixed mindset about what kind of haircut you want.
You need to care about three things. Your hair type, your face cut, and the scalp colour before asking your barber to start the operation. Don’t let your focus get distracted. Ask your barber to run the skin fade by creating an arc near the ears and around the head.
The very next thing is, choose an upper haircut. Because it is adjustable then your low skin fade will look good on you. Your barber can help you during selection. You know your skin colour. There are plenty of haircuts available on the internet world. Select the best one which seems attractive according to skin type.
If your barber is a professional, this information will be enough for him to proceed next step.
Also Read, 8 Best High Fade Dreads Hairstyle to Get Stylish Look
6. Are low skin fades good?
Yes, a low-skin fade haircut is good. But when? There are plenty of reasons why a low skin fade is always good. Those are as follows.
- A low skin fade always comes with minimum risk. That’s why a beginner is recommended to go with a low skin fade.
- Secondly, a low skin fade is easy to maintain. Once in a week, if you Invest only 5 minutes, it will give you a long-lasting result.
- A low skin fade looks good on a fair skin tone. It becomes easy to adjust with the skin. If you are an owner of long hair, go with a low skin fade. You’ll look stunning.
A lot of other reasons are there. But because of these three reasons, the low skin fade is getting popular.
7. What is the lowest skin fade?
The lowest Skin fade haircut is that one that has a grade of 0. A low skin fade haircut has a grade less than 0.5. However, making the 0 skin fade becomes quite tough. There are several haircuts available with 0 fade which looks good in it. A 0-grade skin fade simply refers to a hair cut where the length is nearly 0.
8. What are the best low skin fades to try?
Undoubtedly, a low-skin fade haircut is the most gorgeous hairstyle to try. This current era is flowing with the ideas of new things. They are eager to try and explore themselves. When it comes to skin fade, a low skin fade haircut is always good. If you are interested in a haircut where a skin fade is required in the side areas and the nape. Some exciting low-skin haircuts are as follows.
- Low skin fade with a crew cut ( a short crew cut can be tried too)
- Low skin fade with a quiff
- An undercut with a low skin fade
- A buzz cut with a low skin fade
- A low skin fade with short textured hair
- Pompadour and low skin fade
- Low skin fade with slicked hair
- Low skin fade and cropped curls
- Wavy textured hair with low skin fade
- Low skin fade with Faux hawk
- Low skin fade with blow out
There are plenty of other Haircuts too. However, these specific Haircuts always look good. You can find there are some haircuts where short, textured, curly, wavy, long and all the types are being covered. Choose whatever suits you. Along with the low skin fade, these will look good on high and mid skin fade too.
9. What is Faux Hawk Low skin fade?
A low skin fade haircut with the faux hawk skin fade is a very stylish and modern haircut to try. It is a mixture of the Mohawk style with the fohawk. Fohawk is new to the styling world which generally means fake hawk. In short, the term is being called faux hawk. Getting this style is very easy. Follow the given procedure.
A faux hawk low skin fade deals with two haircuts. The skin fade and the top haircut. The top part doesn’t need a cut because styling will be best to address it. Let’s first decide what do you want? One-sided skin fade or both-sided? According to that, the next steps will be.
For the top part, you need to increase your hair length up to 4 to 5 inches. You can make a division line in the first place to understand where to run the scissors. Make sure your hair is dry so that you can apply the combing easily.
Take a brush. A brush can help you to have the faux instead of the comb. Allow the brush towards the upper direction. That uplifting force will help the hair to get adjusted easily. Use wax or hair gel to give stability. Always remember, you have to keep combing until your hair gets the reflex of its stability.
Now, you have to focus on the skin fade part. Make a cut near the sides and the nape. Run your trimmer at less than 0.5 grade. There are several styles you can apply.
Those are- Classic Faux hawk, disconnected faux hawk with low skin fade, volume faux hawk, faux with a disconnected undercut, drop fade faux, spikey textured, skin sharp faux, hipster faux hawk, finger-combed faux hawk, dead punk spikey drop skin fade and so on.
10. What’s The Low skin fade + Comb Over style?
A low skin fade haircut with a comb-over style is very unique. As mentioned, a skin fade can never be professional. However, this style only can give you a little bit of a professional look. If you are a fan of Hollywood movies, then you must have seen a lot of men are having this style. Some facts like hair length, hair thickness matter when it comes to low skin fade with a comb-over.
Getting a comb-over haircut is very easy. You just have to make a line from where the top hair will start. There is no specific hair length for this haircut. You can keep 2 to 5 inches long hair. As the hair won’t be uplifted, the length doesn’t matter.
Allow hair gel or wax before combing or brushing. Make sure the hair is a little wet. Run your brush sidewise and blend over the head. The benefit is, you don’t have to make the division line. As you are doing this step, a line will be created automatically. Now the skin fade.
Allow your trimmer to wipe the lower hair. Make sure, it blends properly with your head. The graduate decrement is necessary. Set your trimmer first at 0.5. Then step by step make it lower. A beard will be perfect for this comb-over haircut. You’ll look stunning.
There are several types of comb-over low skin fade. Such as comb-over skin fade with longer hair, comb over fade with curly hair, comb over skin fade with short and textured hair, line up comb over skin fade, razor fade, bald skin fade with the line-up, comb-over side part, low bald fade, and hard part with a low skin fade. These are some very popular haircuts you can try.
Also Read, 10 Best Flow Haircuts For men: An Ultimate Guide
11. How to Get low skin fade with a high top?
A low-skin fade haircut with a high top is always attractive. If you have noticed, a low skin fade haircut becomes attractive when the high top part gets on it. Our subconscious mind always appreciates those things which have a different sense of styling. A low skin fade with a high top is just like that.
What you can try? Because the high top is just an option. Within this broad category, there are several subcategories of a high top. Such as pompadour, Mohawk, and so on. When you are going to select any high top, you must be assured that the haircut will suit your face cut. Even low skin fade looks good with fair skin. Be selective during choosing the haircut.
Here are some basic tips that you should follow while having a low skin fade with a high top. You can follow the tips with any high top.
- First of all, you should choose a haircut which looks good on your face. Watch the face cut, match the skin tone/scalp color and match your hair texture.
- It is better to go to a barber but if you want to do it by yourself, make sure you have all the instruments and proper lightings. As you are aiming for a high top, your hair must be 4 to 5 inches long. If your top hair needs to be uplifted, use a brush on dry hair. If the hair needs to be blended over the head, use a brush or comb on the slightly wet hair.
- A low skin fade must cover the areas near the sides and the nape. You need a double mirror to adjust on the nape. We’ll recommend you to take help from someone while doing the back part. Because one wrong move can ruin everything.
- Lastly, make a stylish division line. In all other haircuts, we have told you to make a division line for adjusting the upper and lower part. However, a stylish division line will make a high top more attractive. How to do it? Nothing much. Just make a stylish curve along the edge of the high top. Make it prominent on both sides.
The rest of the procedures are already known to you. Just make sure, you keep these points in your mind while having a low skin fade with a high top. All the best with your new look.
12. Does a Beard look good with Low skin fade?
The skin fade haircut always looks like a beard. Having a beard is a great benefit if you want a skin fade. Why so? We know that skin fade always depends on the face cut. If you don’t have a suitable face cut, then a beard can manage it.
A sharp beard can adjust your face cut according to your need. Even if you are planning to have a skin fade, then a beard can fill up some gaps on your sides. A low skin fade always focuses on the sides. If you start a beard at the bottom of the skin fade, it can create a different definition of styling.
We’ll recommend you to have a beard with a low skin fade. Doesn’t matter what kind of top haircut you are getting, your masculinity will be cherished.
13. Is the Caeser cut a low skin fade haircut?
There is a huge confusion between a low skin fade haircut and caeser cut. There are several reasons. The most common reason is the hair appearance. Both of these are dealing with short hair. Curly, wavy, and straight all hair types are welcomed equally. However, there are some basic differences. Those are as follows.
A low skin fade haircut always deals with shorter hair. The word skin fade is applied because the hair is mixed up with the skin. On the other hand, a caeser cut short hair, done by the scissors. You know how much you use a scissor, it is impossible to reach the skin fade.
A caeser haircut has a grade between 0.5 to 2. The top, sides, and the back, everywhere it maintains the same density. On the other hand, a low skin fade has a grade of less than 0.5 and it only deals with the sides and the nape.
These are basic differences between low skin fade and caeser. We hope, after knowing this information, from the next time, you’ll easily identify the correct haircut.
14. How to get low skin fade with quiff?
A low-skin fade haircut always looks good with a high top. As you know, there are several high-top hairstyles. Among all of those, undercut and quiff are best. Though undercut and quiff are two different haircuts, however through quiff, you’ll have an idea, how to have an undercut.
First, make a high top with 4 to 5 inches of long hair. The speciality of a quiff is to make the hair uplifted at the centre. A quiff always needs a division line. Make it around the head. Avoid making a line at the back.
Now, use a brush to uplift the top hair to the upper direction. Make sure, your hair is dry enough. If it is wet, it won’t get set. If the hairlines are too tough to move, use hair gel or wax. Quiff generally ends at the end of the head. But we’ll recommend you to keep it at the back.
Give a sharp ‘V’ cut at the end of your head. Following that ‘V’ line, make your division at the sides. Run your trimmer at 0.5. As you need to do the gradual decrement, decrease the pointer from 0.5 to 0 step by step. For the last layer, you can use a razor.
Up to this point, you have the procedure. Now there are some points to remember while having a skin fade with a quiff. If you have dark skin, we’ll recommend you to avoid quiff. Men with fair skin are good to go. You can keep a beard too.
15. Does low skin fade suit with wavy hair?
A low skin fade haircut will look with a low skin fade if you managed the haircut quite well. Those who have wavy and curly hair, know how much it is difficult to find out the best haircut for them.
As you are interested in skin fade, there is a perfect haircut for you. Just follow the steps.
The biggest problem with the wavy hair type is, the owner feels confused about which direction to follow. I’ll recommend you to uplift or back fold the hair. If your hair is dense, you can move it sidewise too.
Let your hair grow up to 4 inches. Make a division line with the help of a comb. The lower portion will have the fade. Run your trimmer at less than 0.5. Run it through your head along the division line.
How will it look good? A wavy hair always catches attention when it’s long. The wavy texture always makes the hair gorgeous. So if you make it large and let it hand on your skin fade, it will give you the best look.
So, follow these steps to have the best skin fade for wavy hair. Take 5 minutes to maintain your hair every day. It will long last.
Also Read, 3 awesome looking Mat Hummels Hairstyles
16. How to have low skin fade in messy and textured hair?
Textured hair is very popular now. A low skin fade haircut with textured messy hair will always look good. To carry the modern styling, texture hairs are getting hype. Along with texture, the messy hairstyle are catching attention too. Then why not try a skin fade with messy textured hair? Let’s try it.
There are three possibilities. Your textured hair may be any of these three. Curly, straight, and wavy. Most busy people don’t get the chance to invest time in their hair. So naturally, their hair becomes messy. If you are one of them, the lines below will help you.
A textured wavy hair will have only one direction. However, the hair body will give a shape of a wave. Anyone with a wavy hair structure can easily imagine it. The same goes for curly hair. For the straight hair type, they need to rely on their brushes. Use brush daily on your head in a particular direction to let your hair adjust with the movements. You can use hair gel or wax too.
There is a unique step that makes messy texture haircut gorgeous. You don’t have to make a division line here. Your hair itself will do it. You have to make a gradual decrement of layers. Allow your scissors to cut the hair.
If your top hair is more than 4 to 5 inches, then the second layer will be 1.5 to 3 Inches. Make sure, the difference in the hair length is visible. Up to this level, your virtual division line is done. Now the real skin fade will start.
Set your trimmer at less than 0.5. You don’t have to change the number. You can select any number or position between 0.5 to 0. Do the trimming. Make a good skin fade around the head. Make sure you are adjusting the sides and the nape too. Along with the nape, give a good skin fade just below the ‘V’ cut.
Thus, you can have a good messy texture with a skin fade.
17. How to do Low skin fade with Short Hair?
A Low skin fade looks good with long top hair. We have made detailed guidance on that topic. But so many people love to keep short hair. What about them? Here’s the best trick for you. However, try to limit the short hair to at least 1 inch.
Here’s a list of the short haircuts, you can try.
- Low skin fade with a crew cut
- Low skin fade with French Crop Top
- Low skin fade with messy hair
- Low skin fade with a buzz cut
- Low skin fade with short slicked hair
- Ivy league-low skin fade
There are plenty of short haircuts that you can try with your low skin fade. We have tried to cover all those haircuts in the following. Doesn’t matter whether you have thin or thick hair, you can continue a low skin fade with your hairstyle.
18. How to Do Low skin fade with Side Parts?
A low skin fade with the side parts is the best classic look you can have. You probably know that the skin fades are not friendly with a professional environment. However, there are some skin fades that can safeguard you. Among low skin fade haircuts, the sides part hairstyle is the one.
Having this haircut is so simple. First of all, you need to prepare your hair. There are no limitations on the hair size. You can keep it long and short as per requirement. However make sure, your hair is highly dense. Take a brush and comb on a particular side by creating a sharp division line.
Do this practice for several days. As soon as the line gets sharpened, take a trimmer or a razor, to make that division line more prominent. Make the line only one side of your head. Below that line, start doing the low skin fade.
Run your trimmer at 0.5 or less. Allow the backside of your head to blend. You can try this haircut. You can try this haircut at any parties, outings, trips, and even in some professional places.
19. How to Do Low-skin Fade with a Crew Cut?
The crew cut with a low skin fade is indeed a good fashion sense. As you know, the crew cut is an underrated hairstyle, usually done by men. For those who love to keep medium size hair, this crew cut with low skin fade will make their look stunning.
To have a crew cut, you need to dry your hair first. A wet hair can’t give a proper response to the haircut. After drying it, take a comb and make your hair length similar all over the head. If you want, you can keep the frontal part longer. Though the main theme of a crew cut is, to maintain the hair length all over the head, you can experiment with your hair. You can try a descending order from front to back.
The above step will be applicable for the top part of the head only. For the sides, you need to use a trimmer. Let the sides have a fade. Now it’s time for you to apply skin fade. Make your trimmer grade at 0.5 and run the place from where you want to start the skin fade.
Men with diamond and triangular face shapes will look good with this. In most cases, this style looks good without a beard. So try it.
20. Will low skin fade looks good with a buzz cut?
Probably, you have heard that a low skin fade doesn’t suit short hair. However, the buzz cut is an exception. A buzz cut with a low skin fade will surely look good. Let’s see how can you have it.
Having a buzz cut is super easy. First, you need to figure out the boundary up to which you want to spread your hair. Then run the trimmer with a constant ratio (2>). As we are dealing with low skin fade which has a grade of 0.5, don’t keep your hair less than grade 2.
Let’s add some beauty to your haircut. Take a temporary marker and mark a curve along your sides, starting from the front to the back of your head. Do it on both sides. Below that line, make your low skin fade with the help of the trimmer.
For the back, you can give a ‘V’ cut. Surely, it will create a stunning look on your face. Doesn’t matter whether you have fair skin or dark skin, this haircut will surely suit you. So, you are good to go with this haircut.
Also Read, Simple Guide to Get Amazing David Villa Hairstyle
21. How a Low skin fade with Spiky Hair will look?
The low skin fade with spiky hair is surely a good combination. The owner of the straight hair will have this gorgeous style. The method of preparing the hairstyle is very easy though. Let’s see how to do it.
Make sure your hair is dry enough. Take a comb and a scissor to adjust the haircut. Run over and over on your head and maintain the same hair ratio all over your head. It is better to handle the haircut with someone professional.
As the motive is to give the spiky hair, you have to use gel. The gel will help your hair to gain stability. Apply the gel on your hand and run as you are trying to point those out upwards. Keep a descending order from the front to end.
Now apply your skin fade with a trimmer with a grade less than 0.5. This spiky haircut with low skin fade looks good with a beard. Doesn’t matter what kind of beard you applying, all beard styles will look with it.
22. How to Do a Low skin fade with Fringe?
For teenagers, a low skin fade haircut with Fringe is a good hairstyle option. Most of the singers and actors are applying this haircut. Those who have fair skin, don’t have a beard, have a diamond, oval and triangular face shape, and love to do experiments with their hair, fringe with low skin fade will make it gorgeous.
Allow your hair to grow at least 4 to 5 inches long. The fringe looks good when the hair is hanging on the forehead. That’s the style. Use a comb and allow all your hair to the frontal direction. Wavy and curly hair will look stunning with this fringe. The straight hair owners can try it too.
To apply the low skin fade, first, make a curve around the boundary of your ears. Then make another curve along the sides below which you want that skin to fade. Do it on both sides. Now run the trimmer at 0.5 or less. Thus you can have a stunning low skin fade with fringe.
23. Can a Black Man has a low skin fade?
Probably, you have heard that a low skin fade haircut doesn’t suit black skin. We can’t deny it completely. We know, exceptions are there, and most importantly, the definition of ‘Looking Good’ depends from person to person. The way of thinking is everything.
Black skin goes perfectly with the high skin fade. The skin tone and the high skin fade match each other. However, a low skin fade with a buzz cut can make a black man stunning. If you have black skin, allow a high skin fade Instead of a low skin fade.
So, don’t worry about it. There are plenty of options are available. You can try low skin fade too. As mentioned, exceptions are there. If not, then be the exception. Never quit experimenting on yourself.
24. How to have a Low skin fade with a Blow-Out?
Among all the eye-catching haircuts, a low skin fade haircut with a blowout is on top. A blowout haircut is bold, stylish, and iconic. Those who have straight, curly, and wavy hair, must try this out.
You must have enough long hair to continue with the blowout. Make your hair at least 3 to 4 inches long. Do this haircut on dry hair. First, make all the hair size the same especially in the middle. Else you can try a descending order from the front part to back. Allow a hairdryer to blow out your hair upward. During this action, allow your combs or brush in an upward direction.
The next step is having the skin fade. You can make an imaginary line along the sides. Do it on both sides. Apply the trimmer at a grade of 0.5 or less. You can keep a beard too. This complete haircut will give you a dashing masculine look. You can try it for weddings, parties, trips and on special moments.
25. How to Have a Low skin fade with Slicked Black Hair?
Having a low skin fade haircut with slicked black hair can make you a style icon. The survey says, most of the men in this world, have straight black hair and they don’t do any styling other than the comb-over. Why so when you can have a slicked black hairstyle with a low skin fade.
Take a comb that consists of small teeth. You can keep a brush too. Doesn’t matter how long your hair is. Starting from the front of your head to the backward direction, do the back brush several times. You have to use wax or hair gel for doing this. Your hair needs to be slightly wet unless it won’t be blended properly.
Draw an imaginary line along the sides from the front to back. Run a trimmer at 0.5 or less than this grade. You can keep a ‘V’ cut at the back. It’s better to create a boundary along with the ears. This hairstyle looks good with a light beard.
This hairstyle can be used in professional places too. It will give you a smart look. Give 20 minutes once a week to maintain the haircut for long.
These are all about the low skin fade haircuts. Almost every style is being covered by us in this article. We hope you’ll like our effort. Read the instructions carefully and ask a professional which hairstyle will look good on you before you try. And if you have enough guts to experiment on yourself, go ahead!
Also Read, 22 Best Boys Hair Highlights Ideas to Get Trendy Look